Get a quote

Free toolShelf load & thickness

Glass Shelf Load & Thickness Calculator

Check how much a glass shelf will sag and how close it is to its limit for a given span, depth, thickness and load. Compares annealed and toughened glass.

Get a free quote

Clear glass shelves with polished edges on stainless steel brackets above a basin in a bathroom
Clear glass shelves with polished edges on stainless steel brackets above a basin in a bathroom

Enter the distance between the supports, the shelf depth and what you plan to put on it. The calculator works out how far the glass bends and how hard it is working, then suggests the thinnest glass that carries the load without a visible sag. It treats the shelf as resting on two supports at its ends with the load spread evenly, the usual case for shelves on brackets, studs or in a cabinet.

mm
mm
kg
Glass

Typical loads per metre of shelf: toiletries 5–10 kg, glassware and ornaments 10–20 kg, books 25–40 kg.

–

Sag in the middle
– mm (limit – mm)
Stress, % of safe working level
–
Most it should carry
– kg
Glass weight
– kg

Copies the panes into the cutting list in the quote form below.

Get a free glass quote

Tell us what you need and where. A glass supplier or glazier who works in your area quotes you directly.

Request no.CL-27154

Cutting list (optional)

Know the sizes? List each pane in millimetres. Toughened glass can't be cut afterwards, so sizes help the glazier quote, but they will still measure up before ordering.

#Width (mm)Height (mm)Qty
1××
2××
3××
0 m²no panes yet
Thickness, if you know it
Tick what applies (optional)

Free and no obligation. By sending you agree that we may share your request with a suitable supplier or glazier. See our privacy policy.

How the calculation works

A shelf on two supports is a simply supported beam. With the load spread evenly, the sag in the middle is 5 × W × L³ ÷ (384 × E × I), where W is the total load (your items plus the glass itself), L the span, E the stiffness of glass (about 70 GPa) and I = depth × thickness³ ÷ 12. The bending stress is the moment W × L ÷ 8 divided by depth × thickness² ÷ 6.

The calculator compares that stress with a long-term working stress of about 7 MPa for annealed glass and 28 MPa for toughened glass, conservative figures for loads that stay on the shelf for years, and treats a sag of more than span ÷ 200 as too much, since it starts to show and things roll.

Rules of thumb for glass shelves

  • Thickness matters most. Stiffness rises with the cube of thickness, so 10 mm glass is about twice as stiff as 8 mm.
  • Shorter spans help most of all. Halving the span cuts the sag to an eighth or less. Add a middle bracket rather than going thicker.
  • Toughened glass is stronger, not stiffer. It takes about four times the stress before breaking, but it bends just as much. For long or heavily loaded shelves, sag decides the thickness, not strength.
  • Bathroom and display shelves: 6 mm toughened is common for short spans with light items, 8–10 mm for books, glassware and longer spans.
  • Cantilevered shelves (held only at the back, on hidden channels) are a different case. The channel maker's load tables apply, and 10–12 mm toughened or laminated glass is typical.

When to ask a professional

The calculator is a guide for household and shop shelves. For glass carrying people, heavy equipment, aquarium water or anything over a walkway, the glass must be designed by a glazier or engineer, usually in laminated toughened glass so that a broken pane stays in place.

Frequently asked questions

How thick should a glass shelf be?
For a 600 mm span carrying light items, 6 mm toughened glass is usually enough. Books, crockery and spans of 800–1,000 mm typically need 8–10 mm, and long or heavily loaded shelves 12 mm or an extra support. Use the calculator with your own sizes and load.
How much weight can a glass shelf hold?
It depends on the span, depth, thickness and type of glass. An 8 mm toughened shelf of 800 × 250 mm on two end supports carries roughly 40 kg spread evenly before the sag starts to show (span ÷ 200); a 600 mm span carries about twice that.
Should a glass shelf be toughened?
Usually, yes. Toughened glass is about four times as strong and breaks into small blunt pieces, which matters in bathrooms, kitchens and shops. It must be ordered to size with any holes made first, because it cannot be cut afterwards.
Why does the shelf sag even though it is strong enough?
Glass is stiff but thin, and sag depends on stiffness, not strength. Toughening adds strength but not stiffness, so a long thin toughened shelf can be safe yet still bend visibly. Go thicker or shorten the span.

Guides and quotes for this job

More glass calculators

Get a free quote